Please Note:

The Open Access Repository will be moving to a new authentication system on the 1st of November.

From this date onwards, account holders will be required to login using their University of Tasmania credentials.
If your current repository username differs from your University username, please email so we can update these details on your behalf.

Due to the change, there will be a short outage of the repository from 9am on the morning of the 1st of November

Open Access Repository

Development of a micro-fluidic manifold for copper monitoring utilising chemiluminescence detection


Downloads per month over past year

Tyrrell, EC and Gibson, C and MacCraith, BD and Gray, D and Byrne, P and Kent, N and Burke, C and Paull, B (2004) Development of a micro-fluidic manifold for copper monitoring utilising chemiluminescence detection. Lab on a Chip, 4 (4). pp. 384-390. ISSN 1473-0197

[img] PDF
ECT2.pdf | Request a copy
Full text restricted
Available under University of Tasmania Standard License.


The progressive development of a micro-fluidic manifold for the chemiluminescent detection of copper in water samples, based on the measurement of light emitted from the Cu(II) catalysed oxidation of 1,10-phenanthroline by hydrogen peroxide, is reported. Micro-fluidic manifolds were designed and manufactured from polymethylmethacrylate (PMMA) using three micro-fabrication techniques, namely hot embossing, laser ablation and direct micro-milling. The final laser ablated design incorporated a reagent mixing channel of dimensions 7.3 cm in length and 250 × 250 µm in width and depth (triangular cross section), and a detection channel of 2.1 cm in length and 250 × 250 µm in width and depth (total approx. volume of between 16 to 22 µL). Optimised reagents conditions were found to be 0.07 mM 1,10-phenanthroline, containing 0.10 mM cetyltrimethylammonium bromide and 0.075 M sodium hydroxide (reagent 1 delivered at 0.025 mL min–1) and 5% hydrogen peroxide (reagent 2 delivered at 0.025 mL min–1). The sample stream was mixed with reagent 1 in the mixing channel and subsequently mixed with reagent 2 at the start of the detection channel. The laser ablated manifold was found to give a linear response (R2 = 0.998) over the concentration ranges 0–150 µg L–1 and be reproducible (% RSD = 3.4 for five repeat injections of a 75 µg L–1 std). Detection limits for Cu(II) were found to be 20 µg L–1. Selectivity was investigated using a copper selective mini-chelating column, which showed common cations found in drinking waters did not cause interference with the detection of Cu(II). Finally the optimised system was successfully used for trace Cu(II) determinations in a standard reference freshwater sample (SRM 1640).

Item Type: Article
Journal or Publication Title: Lab on a Chip
Page Range: pp. 384-390
ISSN: 1473-0197
Identification Number - DOI: 10.1039/b400805g
Additional Information:

© 2004 Royal Society of Chemistry

Date Deposited: 30 Oct 2008 08:32
Last Modified: 18 Nov 2014 03:52
Item Statistics: View statistics for this item

Actions (login required)

Item Control Page Item Control Page