Open Access Repository

The slamming and whipping vibratory response of a hydroelastic segmented catamaran model

Downloads

Downloads per month over past year

Lavroff, J (2009) The slamming and whipping vibratory response of a hydroelastic segmented catamaran model. PhD thesis, University of Tasmania.

[img] PDF (Whole thesis)
whole_LavroffJa...pdf | Document not available for request/download
Full text restricted
Available under University of Tasmania Standard License.

Abstract

A 2.5m hydroelastic segmented catamaran model was developed based on the 112m INCAT wave-piercer catamaran to simulate the vibration response for the measurement of dynamic slam loads during head sea tests at the Australian Maritime College towing tank. Numerical computations and results of dynamic finite element methods were used as a basis for predicting the motions and loads acting on the hydroelastic catamaran model. A load measurement system and data acquisition system was developed to measure the dynamic wave loads and motions of the catamaran model. A two degree of freedom spring-mass theoretical model was developed to predict the first longitudinal modal frequency response of an NPL6A hydroelastic model and was applied to the development of a three degree of freedom spring-mass system used to predict the wet and dry whipping frequency response of the catamaran model. Vibration tests were performed on the catamaran model in air and still water to investigate the effects of stiffness and mass on the first longitudinal modal frequency response. The whipping frequency of the catamaran model was validated using full-scale slamming and whipping accelerations obtained on a 112m INCAT catamaran vessel during a delivery voyage to Japan. Towing tank tests were performed in regular seas to measure the dynamic slam loads acting on the centre bow and vertical bending moments acting in the demihulls of the catamaran model as a function of speed, wave frequency and wave height to establish the operational loads acting on the full-scale 112m INCAT catamaran vessel. An analysis was performed on the catamaran model slamming kinematics in regular seas to form a basis for developing numerical techniques used to predict slam occurrence and slam severity. The effects of variations of wave height, model test speed and wave encounter frequency were combined so as to express slam severity in terms of the maximum relative bow velocity. Peak slam forces measured on the bow of the model were found to approach the weight of the model this being similar to the findings of full-scale vessel trials. Slam impulses when scaled found greater slam durations at full-scale while scaling of the peak strain energy showed that the hydroelastic model provides a good basis for simulating the energy imparted by the slam into whipping. Thorough testing over a range of encounter frequencies and wave heights exposed the catamaran model to extremely severe slamming without evidence of complete bow immersion indicating that the INCAT 112 m wave piercer design is inherently seaworthy and relatively immune from deck diving in seas up to 5.4m.

Item Type: Thesis (PhD)
Copyright Holders: The Author
Copyright Information:

Copyright 2009 the author

Additional Information:

Subject to the confidentiality agreement in place between the University of Tasmania, INCAT Tasmania and Revolution Design, this Thesis is then available for use in the Library and copying in accordance with the Copyright Act 1968. CD-ROM contains mpg files. Thesis (PhD)--University of Tasmania, 2009. Includes bibliographical references. 1. Introduction -- 2. Design of the hydroelastic segmented catamaran model -- 3. Wet flexural mode response of an NPL 6A segmented model -- 4. The whipping vibratory response of the hydroelastic segmented catamaran model -- 5. The slamming and whipping response of the hydroelastic segmented catamaran model -- 6. The slamming kinematics of the hydroelastic segmented catamaran model -- 7. Conclusions

Date Deposited: 19 Dec 2014 02:57
Last Modified: 21 Dec 2016 22:22
Item Statistics: View statistics for this item

Actions (login required)

Item Control Page Item Control Page
TOP