Open Access Repository

Characterisation of physical and mechanical properties of unthinned and unpruned plantation-grown Eucalyptus nitens H.Deane and Maiden lumber

Downloads

Downloads per month over past year

Derikvand, M, Kotlarewski, NJ ORCID: 0000-0003-2873-9547, Lee, MW, Jiao, H ORCID: 0000-0001-8877-7268 and Nolan, G ORCID: 0000-0002-5846-7012 2019 , 'Characterisation of physical and mechanical properties of unthinned and unpruned plantation-grown Eucalyptus nitens H.Deane and Maiden lumber' , Forests, vol. 10, no. 2 , pp. 1-13 , doi: 10.3390/f10020194.

[img]
Preview
PDF
forests-10-0019...pdf | Download (8MB)

| Preview

Abstract

The use of fast-growing plantation eucalypt (i.e., pulpwood eucalypt) in the construction of high-value structural products has received special attention from the timber industry in Australia and worldwide. There is still, however, a significant lack of knowledge regarding the physical and mechanical properties of the lumber from such plantation resources as they are mainly being managed to produce woodchips. In this study, the physical and mechanical properties of lumber from a 16-year-old pulpwood Eucalyptus nitens H.Deane & Maiden resource from the northeast of Tasmania, Australia was evaluated. The tests were conducted on 318 small wood samples obtained from different logs harvested from the study site. The tested mechanical properties included bending modulus of elasticity (10,377.7 MPa) and modulus of rupture (53 MPa), shear strength parallel (5.5 MPa) and perpendicular to the grain (8.5 MPa), compressive strength parallel (42.8 MPa) and perpendicular to the grain (4.1 MPa), tensile strength perpendicular to the grain (3.4 MPa), impact bending (23.6 J/cm2), cleavage (1.6 kN) and Janka hardness (23.2 MPa). Simple linear regression models were developed using density and moisture content to predict the mechanical properties. The variations in the moisture content after conventional kiln drying within randomly selected samples in each test treatment were not high enough to significantly influence the mechanical properties. A relatively high variation in the density values was observed that showed significant correlations with the changes in the mechanical properties. The presence of knots increased the shear strength both parallel and perpendicular to the grain and significantly decreased the tensile strength of the lumber. The results of this study created a profile of material properties for the pulpwood E. nitens lumber that can be used for numerical modelling of any potential structural product from such a plantation resource.

Item Type: Article
Authors/Creators:Derikvand, M and Kotlarewski, NJ and Lee, MW and Jiao, H and Nolan, G
Keywords: static bending; impact bending; tensile strength; compressive strength; shear strength; cleavage; hardness; wood failure modes
Journal or Publication Title: Forests
Publisher: MDPIAG
ISSN: 1999-4907
DOI / ID Number: 10.3390/f10020194
Copyright Information:

Copyright 2019 The Authors. Licensed under Creative Commons Attribution 4.0 International (CC BY 4.0) https://creativecommons.org/licenses/by/4.0/

Related URLs:
Item Statistics: View statistics for this item

Actions (login required)

Item Control Page Item Control Page
TOP